SCAILX-2GS234-xY camera
SCAILX-2GS234-xY 2 MP Global Shutter board level camera
The SCAILX-2GS234 is a board level camera with a 2 MP Global Shutter sensor, ISP processing chip and SCAiLX MIPI CSI compatible connector.
front side
back side
The SCAILX-2GS234 is based on the Onsemi AR0234 sensor and AP1302 ISP, and is available in Monochrome or Color versions.
Models
Partnumber | Type |
SCAILX-2GS234-xM | Monochrome |
SCAILX-2GS234-xC | Color |
SCAILX-2GS234-xIR | Color, without IR filter |
The x in the above model number indicates the selected lens mount option: 2=pinhole, 5=M12 mount, 7=no mount, 8=CS mount.
Example for the SCAILX-2GS234-xC (color) variants:
Part number | Description |
SCAILX-2GS234-2C | Color sensor with pin hole lens |
SCAILX-2GS234-5C | Color sensor with M12 lens mount |
SCAILX-2GS234-7C | Color sensor with no mount |
SCAILX-2GS234-8C | Color sensor with CS lens mount |
Blockdiagram
The SCAILX-2GS234-xY is based on:
AR0234 Onsemi Global shutter sensor with MIPI out
AP1302 Onsemi ISP with MIPI-2-MIPI video processing
On board microcontroller for I2C communication between SCAILX-SOM-AI and ISP
Flash memory for microcontroller program and camera settings
Specification
Item | Specification |
Image sensor | OnSemi AR0234CS 2.3Mp Global Shutter |
Recording Pixels | 1920x1200 |
Pixel Size | 3.0 µm |
Image Size | 5.76 x 3.6 mm |
Optical size | 1/2.6 inch (6.8 mm) |
Shutter type | Global Shutter |
Resolutions / Framerates | 1920x1080 @ 30/60 fps 1280x720 @ 30/60 fps |
Pixel clock rate | 90 MHz |
Sensitivity | Color: < 0.1 lux, Monochrome: < 0.05 lux |
Signal to Noise ratio | 37 dB |
Dynamic range | 70 dB |
Dimensions
front side
with M12 lens mount
back side
Connectors
Connector | Connector type | Description |
|---|---|---|
J400 | DF40C-40DP-0.4V(51) | MIPI / Power connector, board-to-wire connector 40 pins on back side |
P200 | WR-WTB 1mm 6p | Trigger/ Sync & FLASH, connector on front side |
J300 | WR-FPC ZIF 0.5mm 12p | (Debug) |
Connecting SCAILX-FLEX between SCAILX-2GS234-xY and SCAILX-SOM-AI:
SCAILX-SOM-AI
SCAILX-2GS234-xY
Single and Dual camera configuration
The SCAILX-2GS234 camera can be connected to the SCAILX-SOM board via J400 using a flex foil PCB, connecting to either CSI1 and/or CSI2 port.
SCAILX-SOM-AI SoM board | 2x SCAILX-2GS234-xM/xC | 2x 1080p60 max. |
The SCAILX-SOM-AI board supports up to 2x SCAILX-2GS234-xM/xC in 1080p@60.
Single camera configuration
The SCAILX-SOM-AI board delivers two identical MIPI CSI-2 camera ports. The SCAILX-SOM-AI board will detect automatically which camera is connected and install the appropriate driver for it.
Dual camera configuration
The SCAILX-SOM-AI board delivers 2 identical MIPI CSI-2 camera ports. The SCAILX-SOM-AI board will support different MIPI camera boards.
Example of dual camera configuration using 2x SCAILX-2GS234-xY camera modules connected to the SCAILX-SOM-AI using 2x SCAILX-FLEX-480 (480 mm FlexPCB cables) for extended range between SCAILX-SOM and camera modules.
MIPI interfacing is restricted to 480 mm on each port.
Dual camera stream using the SCAILX-2GS234 Cameras
ISP functionality
Item | Specification |
Automatic Exposure Control | Auto / Manual / Region Of Interest (ROI) / Face |
Brightness | 0 ~ 255 |
Contrast | 0 ~ 255 |
Gamma | 0.4 ~ 1.0 |
Saturation | 0 ~ 255 |
Sharpness/Blur control | Yes |
Noise reduction | Yes |
Automatic Color Adjustment | Auto / Manual / Push2White / Set |
Manual Color Adjustment | Yes |
BLC | Yes |
HDR | No |
Mirror/Flip | Yes |
Panning | Yes, (128 steps) |
Digital zooming | Yes |
Upgradable | Yes |
Video format selection | Yes |
Trigger | Yes |
Flash | Yes |
Sync | Yes |
Lens shading correction | Yes |
Face detection | Yes |
Anti Flicker | Yes |
JPEG quality control | Yes |
Filter effects | Yes |
The ISP functionality is supported via an extensive set of I2C commands through Videology’s Python API.
User Guide
Refer to UG_SCAILX-2GS234 for full description of camera functionality, I2C commands and more.
Programming and setup
The SCAILX-2GS234 camera board requires no board level setting or configuration and will be detected and configured automatically at SCAILX-SOM start-up.
Software support
Datasheet
Step 3D model