SCAILX-ETH-DC
SCAILX-ETH-DC board
The SCAILX-ETH-DC is the SCAiLX compatible RGMII interface board for 10/100/1000 Mbps full duplex network connectivity. The SCAILX-ETH-DC is based on the SCAILX-ETH-POE board without the PoE circuitry.
The 12 V DC power is connected to a 2-pin connector on the front side indicated by “12V-EXT”.
front side
back side
Dimensions
front side
side view
back side
Connection
The SCAILX-ETH-DC board is connected to the RGMII port on the SCAILX-SOM board via a flex PCB connector with 40 pin board-2-board/wire connector.
The SCAILX-FLEX-ETH is connected between RGMII port on SCAILX-ETH-POE and RGII on SCAILX-SOM-AI.
SCAILX-ETH-DC | Type | SCAILX-SOM-AI board |
|---|---|---|
J2 | RGMII | RGMII port |
Programming and setup
The SCAILX-ETH-DC board needs no configuration or setup.
Datasheet
Step 3D model
, multiple selections available,